product review overlay image

Product Description

Performance Camshaft EJ257 - EJ207 Conversion Kit V9 STI DBW

This unique Kit has been designed and produced, in order to eliminate the problems encountered when fitting an EJ207 Engine into a vehicle which would normally be fitted with an EJ257 Engine.  These cams fit directly into the EJ207 VVT heads, and work with the EJ207 Drive By Wire 3 pin cam sensor, with no modifications but require a small additional loom for both cylinder heads plus the use of DBW cam (3 pin) sensors only.

Our Camshaft Kits have been designed and developed in house, to ensure that they deliver the maximum power possible over a wide power band.

Each Cam is precision ground and polished from a new blank to the same exacting standards and tolerances every time, ensuring you have the same quality Cams as you would see in our race engines.

# technical specification

  • Inlet 280 Degrees Duration 10.80mm lift - Exhaust 280 Degrees Duration 10.80mm Lift

We have a range of profiles which we can apply to Camshaft Kits, if this is not suitable for your particular needs

# confirmed applications

  • Subaru Impreza V9 EJ257 STI Drive By Wire with EJ207 type engine fitted ONLY
  • All engines using single AVCS cylinder heads Spec C JDM etc

If used in cars without DBW then a sensor ancillary loom will be needed and a suitable ECU plus mapping for hall effect sensors.

Specifications

Brand
ADV
Product Code
C/C-E19

Customer Reviews

Performance Camshaft Kit For EJ257 - EJ207 Conversion V9 STI DBW

Product Code C/C-E19