product review overlay image

Product Description

SUBARU 2.3 COMPETITION FULL STROKER KIT

EJ22 Turbo Crank Case Major Up-Grade To 2.360 Litre.

A Complete Subaru Impreza Legacy Or Forester EJ22 Turbo Stroker Bottom End Rebuild And Up-grade Full Kit.

This Kit Consists The Following:-

1 New Genuine Subaru 79mm Crankshaft With A CL Competition Bearings At Standard Size Using 60mm Main Journal Diameter And 52mm Big End Pin Diameter And Often Pushed To Well Over 650 bhp.

1 Set Of Mahle 2618 Forged Racing Pistons At 97.5mm Or 98.0mm Bore Size And Capable Of 800bhp And Bullet Proof In The Right Engine And With Fitting Instructions.

4 New Manley Steel ' H ' Section Con Rods With ARP 2000 Rod Bolts And Capable Of 600bhp Plus Also With Fitting Instructions.

1 Tube Of Graphogen Engine Build Bearing Lube.

1 Tube Of Three Bond Assembly Sealer.

1 Build Seal Kit Containing All Seals And ' O ' Rings To Assemble The Crankcases.

1 Head Gaskets With A Choice RCM In Varying Thicknesses.  

The Kit Will Fit All EJ22 Crank Cases With A Rear Position 5 Thrust Bearing Modification

Please Note:- Because Of The Extra Throw On The Crankshaft Some Cases May Need To Be Modified To Clear The Con-rods As They Rotate To And From TDC

If You Are Not Able To Carry Out Any Of The Machining Work Necessary To Fit This Stroker Kit We Would Be Happy To Help With Any Technical Advice And Carry Out Any Machining Work For You

Please State At Checkout Which Size Pistons You Require For The Re-Bore 97.5mm Or 98.0mm

Specifications

Brand
ADV

Customer Reviews

Subaru 2.3 Stroker Kit Competition Mahle Forged Racing Pistons ACL Bearings